Equipment overview::
It is used for users to conduct corresponding climate mutation tests on complete products (or components), electrical appliances, instruments, materials, coatings, plating, etc. It is suitable for high and low temperature testing on electrical, electronic, mechanical industries and other products, components, materials, etc. , Humidity and heat test, conduct hot and cold shock test under simulated temperature and humidity changes to evaluate the quality of the test product
Applicable standards:
GB/T2423.1-2001 Low temperature test method；
GB/T2423.2-2001；
GB/T2423.22-1989 Temperature change test N;
National military standard GJB150.3-86；
National military standard GJB150.4-86；
National military standard GJB150.5-86；
GJB150.5-86 Temperature shock test;
GJB360.7-87 Temperature shock test;
GJB367.2-87 405 Temperature shock test；
J/T10187-91Y73 Series temperature change test chamber—three-box type;
Meets the standard IEC68-2-14_Test method N_Temperature change.
Features:
Energy saving and consumption reduction: Use gas-liquid bypass mode to adjust the cooling capacity to achieve constant temperature and humidity.
Easy to operate: Programmable color LCD touch controller can be combined with PID control; experimental data recording and processing methods are flexible.
High reliability: all key components are imported to ensure service life and reliability.
Specifications:
| Model | IE31A80L | IE31A100L | IE31A150L | IE31A225L | IE31A408L |
| Temperature range | -55℃ ～ +150℃ |
| Temperature fluctuation | ±1℃ |
| temperature uniformity | ≦2.0℃ |
| temperature recovery time | In 5 Minc |
| Heating rate (heat storage area) | It takes about 40 minutes to rise from RT to +150℃ | It takes about 50 minutes to rise from RT to +150℃ |
| Cooling rate (cold storage area) | It takes about 65 minutes to drop from RT to -55℃ | It takes about 70 minutes to drop from RT to -55℃ |
| Interior size:WxHxD(mm) | 500x400x400 | 500x400x500 | 500x600x500 | 500x750x600 | 600×850×800 |
| Equitment size: WxHxD(mm) | 1480×1450 ×1950 | 1480×1485×2050 | 1500×1750×2150 | 1600×1900×2250 | 1800x2000x2500 |
| Insulation box | ● Outer wall material: high-quality carbon steel plate, surface treated with electrostatic color spraying. The left side of the box has a diameter of φ50mm. ● Inner wall material: SUS304# matte stainless steel plate. ● Insulation material: rigid polyurethane foam insulation layer + fiberglass. |
| Box door | For single-door doors, install a door frame heating wire at the door frame to prevent condensation on the door frame at low temperatures. |
| Observation window | Install a W 300×H 400mm observation window on the door. Multi-layer hollow electrothermal coated glass can effectively insulate heat and prevent condensation. |
| Sample holder | Stainless steel sample rack with 2 layers, adjustable layer height, load capacity 30kg/layer. |
| Refrigeration compressor | French Taikang fully enclosed compressor | German Britzer Semi- dense type compressor | German Bitzer semi-dense type compressor | German Bitzer semi-dense type compressor | German Bitzer semi-dense type compressor |
| Refrigerant | Non-fluorine environmentally friendly refrigerant R404A R23 complies with environmental regulations, safe and non-toxic |
| Condenser method | Air-cooled | Water-cooled | Water-cooled | Water-cooled | Water-cooled |
| Safety protection device | Heater anti-air fire protection; heater over-current protection; circulation fan over-current and overload protection; compressor high-voltage protection; compressor over-heat protection; compressor over-current protection; over-voltage reverse phase protection; line circuit breaker; leakage protection. |
| Power supply | AC380V;50Hz;18KW | AC380;V50Hz;18KW | AC380;V50Hz;22KW | AC380;V50Hz;22KW | AC380;V50Hz;25KW |
Contact Information:
Infinity Machine International Inc.
No.103 Building 4, Furong Industrial Center, Wangniudun Town, 523200, Dongguan City, China
Contacts: Sandy Chen
Tel: +86 189 2293 3631
Email: sales1@infinity-machine.com
